Many customers need to bend the titanium sheet to the specified condition. But there is a risk of sheet fracture during the bending process of the titanium sheet.
The elastic modulus of titanium is very low, so it is easier to bend and deform. According to the different types of titanium plates, the corresponding yield strength is different. The higher the yield strength, the greater the pressure during bending, so the equipment pressure should be adjusted during bending. Big.
For titanium materials with higher grades, the elongation is reduced, and the material exceeding the elongation will break at a small bending radius.
If the thickness of the titanium plate is thin, heating is not required. If it is a thick plate, it is necessary to heat the entire plate evenly to about 150-280 degrees.
For more questions please contact our technical team: info@tsm-titanium.com。
