Titanium Reducing Tee - Engineered for High-Performance Piping Systems
Titanium Reducing Tee from TSM Technology is a precision-engineered pipe fitting designed for demanding industrial piping systems requiring superior corrosion resistance, strength, and long-term reliability. Manufactured under internationally certified quality management systems, our titanium reducing tees provide excellent resistance to chloride corrosion, chemical attack, and high-temperature environments. Whether installed in chemical processing plants, marine systems, desalination facilities, power generation networks, or aerospace fluid circuits, TSM's titanium reducing tees provide a robust and reliable solution for transitioning between pipe sizes without compromising system strength or fluid dynamics.
As a globally recognized supplier and exporter of specialty metal materials, TSM Technology focuses on the research, production, and distribution of high-performance nickel and titanium alloy products. Our advanced manufacturing capabilities - supported by 3 factories, 8 production lines, and over 100 machines - enable us to deliver consistent quality and scalable supply to customers in more than 50 countries across Europe, the Americas, Southeast Asia, and the Middle East. Manufactured through advanced hot forging and machining processes, each titanium reducing tee exhibits uniform wall thickness, smooth internal flow paths, and tight tolerances that reduce stress concentrations and minimize leakage risk. This makes it an ideal component for systems involving corrosive fluids, high temperatures, or cyclic loading. Our fittings are produced in accordance with major international standards - including ASTM, ASME, and EN - and undergo rigorous quality control to ensure consistent performance in critical applications.
Information about Unequal Tee
|
Materials: |
Titanium Gr2, Gr7, Gr12 |
|
Type: |
Butt Weld (BW) |
|
Dimension: |
ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313 |
|
N |
N |
C |
H |
Fe |
O |
Al |
V |
Pa |
Mo |
Ni |
Ti |
|
Gr 2 |
0.03 |
0.10 |
0.015 |
0.25 |
0.20 |
/ |
/ |
/ |
/ |
/ |
balance |
|
Gr 7 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
0.12~0.25 |
/ |
/ |
balance |
|
Gr12 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
0.2~0.4 |
0.6~0.9 |
balance |
Dimension
|
Nominal Pipe Size(NPS) |
Outside Diameter At Bevel D |
Center to End |
|
|
Run |
Outlet |
Run C |
Outlet M |
|
4×4 |
114.3 |
114.3 |
104.6 |
|
4×3-1/2 |
101.6 |
101.6 |
|
|
4×3 |
88.9 |
98.6 |
|
|
4×2-1/2 |
73 |
95.2 |
|
|
4×2 |
60.3 |
88.9 |
|
|
4×1-1/2 |
48.3 |
85.9 |
|
|
4×1-1/4 |
42.2 |
||
|
4×1 |
33.5 |
||
|
5×5 |
141.3 |
141.3 |
124 |
|
5×4 |
114.3 |
117.3 |
|
|
5×3-1/2 |
101.6 |
114.3 |
|
|
5×3 |
88.9 |
111.3 |
|
|
5×2-1/2 |
73 |
108 |
|
|
5×2 |
60.3 |
104.6 |
|
|
5×1-1/2 |
48.3 |
||
|
6×6 |
168.3 |
168.3 |
142.7 |
|
6×5 |
141.3 |
136.7 |
|
|
6×4 |
114.3 |
130 |
|
|
6×3-1/2 |
101.6 |
127 |
|
|
6×3 |
88.9 |
124 |
|
|
6×2-1/2 |
73 |
120.6 |
|
|
8×8 |
219.1 |
219.1 |
177.8 |
|
8×6 |
168.3 |
168.1 |
|
|
8×5 |
141.3 |
162.1 |
|
|
8×4 |
114.3 |
155.4 |
|
|
8×3-1/2 |
101.6 |
152.4 |
|
|
8×3 |
88.9 |
||
|
10×10 |
273.1 |
273.1 |
215.9 |
|
10×8 |
219.1 |
203.2 |
|
|
10×6 |
168.3 |
193.5 |
|
|
10×5 |
141.3 |
190.5 |
|
|
10×4 |
114.3 |
184.2 |
|
Quality Assurance
Each titanium reducing tee is manufactured under strict quality control protocols, including:
- Dimensional verification
- Surface quality inspection
- Chemical composition analysis
- Mechanical property testing
- Optional NDT and PMI testing
Products are supplied with complete documentation - including Material Test Certificates (MTC) and inspection reports - to support engineering validation and procurement requirements.
Key Engineering Advantages
Superior Corrosion Resistance
Titanium forms a passive oxide layer that protects against chloride pitting, crevice corrosion, and oxidizing environments, outperforming many stainless steels.
High Strength-to-Weight Ratio
Titanium's low density and high mechanical strength reduce overall system weight and structural support requirements.
Thermal Stability
Maintains mechanical properties across a wide temperature range, making it suitable for both high-heat and low-temperature fluid systems.
Flow Efficiency & Stress Distribution
Precision geometry reduces turbulence and stress concentrations at branch transitions, improving system longevity.
Typical Applications
Titanium reducing tees are widely used in systems where reliability, corrosion performance, and material longevity are critical:
- Chemical & Petrochemical Processing - Corrosive fluid distribution and branching lines
- Marine & Offshore Platforms - Seawater lines, ballast systems, cooling circuits
- Desalination & Water Treatment - Brine and aggressive feedwater lines
- Power Generation & Heat Exchangers - High-temperature fluid distribution
- Aerospace & High-Purity Systems - Lightweight, corrosion-resistant fluid routing
|
Chemical |
Oil Mills |
Petrochemical |
Mining |
|
Fertilizers |
Shipbuilding |
Power Plant |
Steel Plant |
|
Oil & Gas |
Defence |
Paper |
Ports |
|
Cement |
Engineering Co. |
Sugar |
Government Org. etc. |
TSM Technology has accomplished a Lot of admiration by our customers owing to its dimensional accuracy, high tension thickness, corrosion resistantancy and Quality products like Titanium Socket Weld Tee & Titanium Forged Elbows. Titanium Forged Fittings are manufactured according to proven designs and from the highest quality materials; the outlet components we Supply are Suitable for a variety of heavy-duty applications.
Contact Us - Request a Quote
For detailed pricing, custom dimensions, or technical guidance on Titanium Reducing Tee solutions: Send us your drawing, size, and application details - our engineering team will provide a tailored quotation and delivery schedule.
INTRESTED? Please send us your inquiry to info@tsm-titanium.com
FAQ
Q: What is a Titanium Reducing Tee?
A: A Titanium Reducing Tee is a type of titanium pipe fitting designed to connect three pipes while reducing the branch diameter. It is commonly used in high-corrosion and high-pressure piping systems where lightweight strength and chemical resistance are required.
Q: What standard does ASTM B363 Titanium Reducing Tee follow?
A: ASTM B363 Titanium Reducing Tee fittings are manufactured according to ASTM B363 specifications for seamless and welded titanium pipe fittings. They are also available in compliance with ASME B16.9 dimensional standards upon request.
Q: Can Titanium Reducing Tee fittings be customized?
A: Yes. Titanium Reducing Tee fittings can be manufactured in custom sizes, pressure ratings, and wall thicknesses according to project drawings. Surface treatments such as pickling and polishing are also available.
Q: Does Titanium Reducing Tee come with material certification?
A: All Titanium Reducing Tee fittings are supplied with Material Test Certificates (MTC). Third-party inspection such as SGS or BV is available upon request.
Q: What is the typical delivery time for Titanium Reducing Tee?
A: Delivery time depends on size and quantity. Standard Titanium Reducing Tee fittings are generally delivered within 15–25 working days, depending on stock and production schedule.
Hot Tags: titanium reducing tee, China, manufacturers, suppliers, factory, wholesale, price, stock
