Inconel 800 round bar is an iron, nickel & chromium based alloy. This Inconel 800H hot finish round bar is known for its moderate tensile strength with good resistance to oxidation and carburization as well at elevated temperatures.
|
Product Name |
Incoloy 800 alloy bars |
|
Standard |
ASTM,JIS,AISI,GB,DIN,EN |
|
Diameter |
1/16" and over |
|
Section |
Rod (round) or bar (square, hexagonal, or rectangular) |
|
Delivery Condition |
Annealed |
|
Finish |
Pickled, Rough Ground, Rough-Turned, Dark Oxide Surface |
|
Technique |
Hot-worked, Cold-worked ,Forging Quality |
|
Test |
Chemical composition test, Tolerances Test, Tensile strength test, Yield strength test, Elongation test |
|
Package Method |
Wooden case, and Customer requirements |
|
Payment way |
T/T, L/C, can be negotitated |
|
Transportation |
Sea(FCL/LCL), airplane, express(TNT/DHL/FEDEX) |
|
Port |
Shanghai,Tianjin,Qingdao |
|
Certificate |
EN10204 3.1/3.2,Third Party Inspection Report, etc |
Equivalent Grades for Incoloy 800 bars
|
STANDARD |
UNS |
WERKSTOFF NR. |
GOST |
BS |
OR |
EN |
JIS |
AFNOR |
|
Incoloy 800 |
N08800 |
1.4876 |
ЭИ670 |
NA 15 |
XH32T |
X10NiCrAlTi32-20 |
NCF 800 |
Z8NC32-21 |
|
Incoloy 800H |
N08810 |
1.4958 / 1.4876 |
ЭИ670 |
NA 15(H) |
XH32T |
X5NiCrAlTi31-20 |
NCF 800H |
Z8NC33-21 |
|
Incoloy 800HT |
N08811 |
1.4859 / 1.4876 |
ЭИ670 |
NA 15(HT) |
XH32T |
X8NiCrAlTi32-21 |
NCF 800HT |
- |
Composition Limits
|
|
Ni |
Cr |
Fe |
Mn |
C |
Cu |
Si |
S |
Al |
Ti |
Al+Ti |
|
UNS N08800 |
30-35 |
19-23 |
Balance |
1.5 |
0.1 |
0.75 |
1.0 |
0.015 |
0.15-0.60 |
0.15-0.60 |
|
|
UNS N08810 |
30-35 |
19-23 |
Balance |
1.5 |
0.05-0.10 |
0.75 |
1.0 |
0.015 |
0.15-0.60 |
0.15-0.60 |
|
|
UNS N08811 |
30-35 |
19-23 |
Balance |
1.5 |
0.06-0.10 |
0.75 |
1.0 |
0.015 |
|
|
0.85-1.20 |
Mechanical Properties according to ASTM B408
|
|
Condition |
Tensile Strength, min, psi(MPa) |
Yield Strength(0.2% offset), min,psi(Mpa) |
Elongation in 2 in.or 50 mm(or 4D), min,% |
|
UNS N08800 |
Hot worked, as-hot-worked |
550 |
240 |
25 |
|
UNS N08800 |
Cold-worked and hot-worked, annealed |
515 |
205 |
30 |
|
UNS N08810 and UNS N08811 |
Cold-worked and hot-worked, annealed |
450 |
170 |
30 |
Alloy 800H can be used in a variety of applications:
Ethylene furnace quench boilers
Hydrocarbon cracking
Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
Industrial furnaces
Heat-treating equipment
Chemical and petrochemical processing
Super-heater and re-heaters in power plants
Pressure vessels
Heat exchangers
Hot Tags: 800 Incoloy alloy bar, China, manufacturers, suppliers, factory, wholesale, price, stock
