Titanium flange is used for connecting a pipe with another pipe which made by t non-ferrous metal titanium or titanium alloy, and it was connected with the tube end.
Titanium flange with holes and bolts is making two flange tight. The titanium flange or pipe fitting is sealed with a gasket. Titanium pipe fittings with a flange (flange or plate) of the pipe.
It can be made from cast, but also by the thread connection or welding structure. Titanium flange is joint by a pair of flanges, a gasket and a number of bolts and nuts. Gasket is putting on the flange between the two sealing, after tighten the nuts, the specific pressure on the surface of the gasket will be making the deformation if over a certain value, and it will fill the sealing surface on the uneven, so that the connection is tightly leaked.
Titanium Flange Classification
If classified the titanium flange by the connecting parts
The titanium flange connection is a detachable connection. According to the connected parts can be divided into container type titanium flange and tube type titanium flange.
If classified the titanium flange by structure
According to the structure type, there have integral titanium flange, butt welding titanium flange, live sets of titanium flange and threaded titanium flange.
Titanium flange material standard
Grade1, Grade2, Grade5, Grade7, Grade9, Grade12, Ti6AL4V, ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533
Supplying condition: R or M
Titanium sheet 0.03-20mm * 1000mm * 2000mm Titanium foil, titanium with a thickness of 0.01 to 0.1mm. Width 120mm. Spot 0.03mm to 0.8mm width from 80 to 500mm titanium rod (light bar) 2mm-250mm * 3000mm Titanium tube diameter 3 to 120mm wall thickness from 0.5 to 20mm.4-110mm * 0.8-10mm * 6000mm titanium wire 0.1-8.0mm titanium cake 50mm-500mm * 50mm-1000mm titanium ring diameter 100 to 2020mm wall thickness from 10 to 300mm
Titanium flange condition
Annealling (M), Hot (R), Cold (Y), Super-wave detection
Forging, Rolling, Bright, Polish
Copyright © TSM Technology Co.,Ltd All Rights Reserved.